View Full Version : 7mm soupcan
dancast
11-27-2009, 03:23 PM
hi cast bullet fans,
rec'd some 7mm soupcan bullets from a board member, and just a question or to. i will be shooting these out of 10" and 14" t/c 7tcu barrels. are these gas checked bullets? and maybe a starting load with 4198 or h322. thanks..dancast
scrapcan
11-27-2009, 06:35 PM
Yes it is a gas checked design.
do a search for 7mm soupcan, there is a bunch of info on the 7tcu. Even several posting using your powder and most likely a similar platform.
here is a quote from post #22 in the following thread
"I have been using 21gr of H4198 in mine. I have the Rifle and the super 14"
http://castboolits.gunloads.com/showthread.php?t=30213&highlight=7mm+soupcan&page=2
Wayne S
11-27-2009, 06:48 PM
If they aren't lubsized, you might want to size all of the bullet, if you don't and the top band is larger than your throat Dia. you will end up with a lot of the bullet below the case neck.Needless to say ask me how I know this
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.