cheese1566
11-03-2009, 11:57 PM
My version of heated portable luber bases. Thanks to deltaenterprises for the spiffy 3/4" alum blocks cut to my dimensions! The blocks are drilled in the back to receive a Lyman cartridge heater and a setscrew to hold it in place. The luber and blocks are bolted through to 3/4" solid oak using T-nuts. Any of the three can be easily set mounted to the bench with a C-clamp.
16889 16890
Also thanks to HawkEyeEarl for the bullet trade for the RCBS Lube A Matic on the far left. It cleaned up and polished very nice!
16889 16890
Also thanks to HawkEyeEarl for the bullet trade for the RCBS Lube A Matic on the far left. It cleaned up and polished very nice!