PDA

View Full Version : wierd boolit



squid1230
11-02-2009, 11:48 PM
I enjoy picking through range scrap and find some interesting boolits sometimes. Here is a pic of one that is 0.55 across and weighs 860gr. It shows rifling, but has no lube grooves. It literally looks like a section of lead rod. Anyone have a clue where this monstrous one came from?

wallenba
11-03-2009, 12:02 AM
Probably a paper patched bullet. Caliber?

jdgabbard
11-03-2009, 12:18 AM
Yeah, prob a bmg round... Paper patched that is.

markinalpine
11-03-2009, 12:37 AM
860 gr? that's almost 2 oz, so I doubt it's a 28ga. shotgun slug.
A couple of black powder, obsolete cartridges were the 55-100 Maynard, and the 56-56 Spencer, but they didn't have bullets (to use the term current with when they were manufactured) were only 530 gr and 350/360 gr respectively. This is from the 10th Edition of cartridges of the world.
I really have no idea.
Mark :coffeecom

Added comment: Would a paper patched boolit exhibit rifling? I'm just not familiar with their use.

Ricochet
11-03-2009, 12:42 AM
A cast boolit for a .55 caliber Boyes antitank rifle?

Bret4207
11-03-2009, 07:46 AM
It's obviously from 44mans new revolter. The 55 Magnum is built on the frame of a Peterbilt tractor and is the latest thing from Hiram "Tex" Lipschitzs custom kosher pistol shop. Its capable of shooting through the Rocky Mountains- lengthwise. 44man intends to try it out on woodchucks next spring. If it works out he's having "Tex" build his deer guy- the 755 Magnum. To get an idea of what this round looks like just keep watching the Military Channel till you see the USS New Jersey firing a full broadside with her 16 inchers. Then double it!

44man
11-03-2009, 09:17 AM
It's obviously from 44mans new revolter. The 55 Magnum is built on the frame of a Peterbilt tractor and is the latest thing from Hiram "Tex" Lipschitzs custom kosher pistol shop. Its capable of shooting through the Rocky Mountains- lengthwise. 44man intends to try it out on woodchucks next spring. If it works out he's having "Tex" build his deer guy- the 755 Magnum. To get an idea of what this round looks like just keep watching the Military Channel till you see the USS New Jersey firing a full broadside with her 16 inchers. Then double it!
:bigsmyl2::bigsmyl2::bigsmyl2:
Actually it is for the viscous chipmunks around here!

jonk
11-03-2009, 10:34 AM
Could it be a lead slug as used to slug a bore?

Leftoverdj
11-03-2009, 10:39 AM
If you can find the guy who shot it, he's going to be real interesting to talk to. Just hang around the range and look for the guy with his shoulder strapped up.

Cloudpeak
11-03-2009, 10:47 AM
I wish the guy who shot these was a regular shooter at the range where I "mined" them:razz: (shown with a 200gr Lyman SWC 45)
http://img.photobucket.com/albums/v620/WyoBob/Targets/DSCN1358.jpg

sturf
11-03-2009, 10:53 AM
Whitworth

odoh
11-03-2009, 11:00 AM
found several like it but in this instance they float the moat so must be zinc ~ range members tell of a fella that use them for his BMG. Its a huge slug but IIRC it was lil' less than 400grs ~ its in the garage shop I'll wgt it again several dings etc. side note, as cast it does have a reduced heel for gas check implying a lead mould but didn't have one.

Ricochet
11-03-2009, 12:13 PM
The BMG has a .510" groove diameter, as I recall. That's why I think it might be for a Boyes. Wouldn't have a gas check on a Whitworth boolit.

http://media.moddb.com/images/mods/1/6/5480/43554.jpg

SciFiJim
11-03-2009, 12:18 PM
Maybe a T-Rex wad cutter?

wallenba
11-03-2009, 12:37 PM
Maybe the core of a jacketed bullet that the rifling reached into?

calaloo
11-03-2009, 01:57 PM
Whitworth's do not have rifling. They have a hexagonal bore.

HORNET
11-03-2009, 08:48 PM
Got anybody out there playing with paper-patched from a slug gun? Some of those are scary big. Used to have a guy at the local club here shooting a .75 cal. About 900 grains of lead and 300 grains of FFg, IIRC. Interesting to watch him shoot....

ghh3rd
11-03-2009, 09:09 PM
Squid - after seeing that huge boolit I had to look at where you are from... figured it was Texas.

Fugowii
11-03-2009, 09:35 PM
I enjoy picking through range scrap and find some interesting boolits sometimes. Here is a pic of one that is 0.55 across and weighs 860gr. It shows rifling, but has no lube grooves. It literally looks like a section of lead rod. Anyone have a clue where this monstrous one came from?

There's a gentleman around here shooting a 700gr boolit in his S&W500. Looks
a lot like that.

Idaho Sharpshooter
11-04-2009, 03:09 AM
My wildcat 550 Gibbs has a boolit that casts .552"

Rich

Rockydog
11-04-2009, 11:53 PM
How about a paper patched .577 Nitro Express 3" or a paper patched .577 Snider? The Express used a 750 grain bullet. The Snider used a 480 Grain projectile. The Snider could be from the recent stash discovered in Nepal and being sold on the web. RD