View Full Version : Star Sizer die housing O-ring
IllinoisCoyoteHunter
10-31-2009, 11:00 AM
I managed to mangle one of the two o-rings in the sizer die housing when removing a die last night too quickly. I called magma and they told me the o-ring is a #116 o-ring. I started looking online for o-ring kits and was wondering if anyone knew the specifications on this size o-ring (ie ID, width, etc). These o-ring kits give sizes, but they don't use the numbers. Any help would be appreciated. Thanks!
GabbyM
10-31-2009, 11:19 AM
your local ag equipment shop should have them for about fifty cents. They are 3/4".
have you tried running it without the O ring? Mine tore the top o ring on the first day and hasn't had one in since. top and bottom are both gone. it does leak a little. I keep forgeting to buy some and I was even into our Massey Ferguson dealership last week buying bolts.
IllinoisCoyoteHunter
10-31-2009, 11:33 AM
Thanks gabby!
jeffwhetstone
10-31-2009, 10:27 PM
ILCoyoteHunter,
I always mangle the o-rings....so I layed into a big stash here:
http://www.amazon.com/Black-EPDM-Rub...8662326&sr=8-1
100 should hold ya for a while.
Jeff
Muddy Creek Sam
10-31-2009, 10:32 PM
116 Black EPDM Rubber O-Ring 70A Duro, 3/4"ID x 15/16" OD x 3/32"W
GabbyM
11-01-2009, 12:58 AM
ILCoyoteHunter,
I always mangle the o-rings....so I layed into a big stash here:
http://www.amazon.com/Black-EPDM-Rub...8662326&sr=8-1
100 should hold ya for a while.
Jeff
See how you all are. I've 150 o rings ordered now. Got 100 of the black ones then 50 silicone just to see how they worked. Shippng cost more than the o rings. not hard to do since the o rings were less than 2 cents each.
jsizemore
11-01-2009, 06:21 PM
Got mine at Lowe's today. Danco #14 10 pack $1.98. Part # 96731. 15/16" O.D.X 3/4" I.D. X 3/32".
TAWILDCATT
11-02-2009, 05:09 PM
a lot of the parts are of the shelf at hardwares.:coffee:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.