View Full Version : 12 ga 3.5 reamer
peter nap
10-22-2009, 07:13 PM
Where can I get a 12 gauge. three and a half inch reamer. I need to stretch a 3" chamber to 3.5 for a project and it's like they don't make them.
I wanted to rent one but neither 4D or Elk Ridge list them...I only want to chamber one barrel. Hate to have one made.
Johnch
10-22-2009, 07:49 PM
Is the shotgun strong enough to handle the 3.5" pressures ?
As the 3.5" factory loads run at 11 - 12 K where the 2 3/4 and 3" run around 10K PSI
And I know some companys use a better grade of steel for the 3.5" barrels
As for the reamer
No clue
John
peter nap
10-22-2009, 07:54 PM
Is the shotgun strong enough to handle the 3.5" pressures ?
As the 3.5" factory loads run at 11 - 12 K where the 2 3/4 and 3" run around 10K PSI
And I know some companys use a better grade of steel for the 3.5" barrels
As for the reamer
No clue
John
Plenty strong John. It's a Handi Rifle with the SB2 Receiver.
John Taylor
10-24-2009, 10:54 PM
Try Pacific Tool and Gauge http://www.pacifictoolandgauge.com/
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.