solution to not putting lube on gaz check bullet

[canuck4570]

http://i705.photobucket.com/albums/ww57/michelmongrain/IMG_0519.jpg
the center punch of the seizer die is machine to accept the shank of the bullet

http://i705.photobucket.com/albums/ww57/michelmongrain/IMG_0522.jpg

bullet shank fit perfectly with the center punch pin

http://i705.photobucket.com/albums/ww57/michelmongrain/IMG_0523.jpg

just lube them as you do ordinarily

easy and effective
when you want to put gaz check just change you center pin and there you go

[stubshaft]

Looks great.

Is that the SAECO 30cal?

[Ricochet]

Nice!

[canuck4570]

Looks great.

Is that the SAECO 30cal?

yes it the saeco 311
165 gr. bullet

[stubshaft]

yes it the saeco 311
165 gr. bullet

One of the most accurate boolits in my 300 Whisper. Nice work on the base pin!

[canuck4570]

lucky to have a son has a machinist

[joeb33050]

Why? What are you trying to do? Is it that you don't want lube where the gas check would be? If so, why not?
Thanks;
joe b.

[canuck4570]

Why? What are you trying to do? Is it that you don't want lube where the gas check would be? If so, why not?
Thanks;
joe b.
many reason joeb33050
if you notice their is no GC and lube on the GC shank has it come out of the lube process,
this save you a lot of time not having to clean this lube
permit me to do a lot of plinking for my of hand shooting,
also keep's you seatind die clean during loading,
lessen the risk of the lube getting to the powder specially during hot summer days,
also I have notice than I am able to shoot these bullet has fast has ordinarily plain base bullets but when the lube was left on the skank ran in trouble around 1200 fps and noticed the same thing for my 45 caliber bullets
when you have a mold modify to make it in a plain base bullet you loose the GC option has for my way you just change the center seizing pin and go back to GC bullet,
hope this will help you undersatand
Canuck