PDA

View Full Version : .32 cal. maxi balls. need mold or bullets/


hithard
10-19-2009, 01:07 AM
I'm hoping someone has a 32 cal maxi ball or similiar mold they want to part with, or even if they don't want to part with it could be kind enough to make a few hundred to sell at a fair price or trade.

Yes, I know buffalo bullets packages these, but where's the fun in that!

Thanks,

Greg
Baron von Trollwhack
10-24-2009, 06:20 PM
I'm not sure what you are doing, but, FWIW, my 32 caplock custom shoots both Hornady bulk wadcutters, and the Lee 32 SWC cast boolit very well using my regular powder charges, and a .005 patch, or paper patched.

BvT
nbr1921
02-23-2010, 09:43 AM
Hi Did you find a mold or boolits, I have a mold. Thanks. Charles
hithard
02-24-2010, 12:09 AM
pm sent,
iron mule
02-24-2010, 09:52 AM
hithard i just recvd a mould it is not the maxi ball mould but is 32 cal and has a nice single lube groove when i cast some i will measure and see if they will work in a 32 front stuffer if so i would be willing to send you a couple hunderd of the for freigt charges/// give me a couple weeks and i'll get back to you on this /// boolit is supposed to drop around 80 grns
mule
rewepython
11-22-2010, 07:40 PM
hey! I am in the same place. the t/c 103 grain maxi ball mold is what i am looking for. has anyone know where there may be one kicking around?
Czech_too
11-23-2010, 08:17 AM
I'm not sure what you are doing, but, FWIW, my 32 caplock custom shoots both Hornady bulk wadcutters, and the Lee 32 SWC cast boolit very well using my regular powder charges, and a .005 patch, or paper patched.

BvT

Just so I understand correctly, I could conceivably use a Lee TL314-90-SWC in my T/C .32 cal Cherokee? To date I've been using only RB but I would like to try the maxi-ball or an equivelent.
Roaddog
11-23-2010, 10:22 AM
You can get maxie ball in 32cal. at Track Of The Wolf. TC made a mold years a go but they are hard to fined now days.
Czech_too
11-24-2010, 04:15 PM
I took a look at Track of the Wolf, but at $8 for 20... It wouldn't take long to go through those. I did find a person over on Auction Arms who has them at what I feel is a reasonable price, like $49 for 500 if my memory serves me. I would still like to find a mould though and will keep looking.