View Full Version : Saeco #444 200 grain What do your mic at?
Just Duke
10-16-2009, 11:33 AM
I was hoping these run a little on the large size. I need .429 or over. The SAECO catalog says .428 for 44-40.
Saeco 4-Cavity Bullet Mold #444 44-40 200 GRAIN
TIA.
Duke
243winxb
10-16-2009, 02:09 PM
My Saeco moulds in 45acp , 44mag. & 38 drop bullets on the large side from .002" to .004" using most alloys. Your bullet is listed as needing a sizing die of .428" so i would guess the bullets will drop at .430" Add antimony to make them larger if needed.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.