Kroil

[shotman]

As many of you know I promote the Kroil for molds. I just ordered some products from Kano. a product they have is Partez. It works better than the Kroil. It s thinner and is clear. Also get a pint of Rustez. If you have a mold that has some light rust in the cav A Qtip will clean it up
I have a 429348 and I tried the Partez on it, 4 drops and perfect boolits. It also dont color the Aluminum molds

[257 Shooter]

Thanks for the info. Have you used the Rustez on anything with heavyer rust?

[Shooter6br]

Try Marval Mystery oil from Wal Mart

[shotman]

Yes about the rust ez. On heavy rust It works good BUT it removes the rust and what it had damaged. I had 2 sprut plates that had bad rust on the top. Took about 30min and was clean BUT pitted where rust had been. It dont eat into the good steel.
the Marvel may work too dont know but I do know the Kroil works and it will free to old lead that is stuck to molds. Will marvel do that??????

[257 Shooter]

Thanks for the info. I will Rustez a try.

[Wayne S]

I checked KANO. found the partez but no rustez althouh I found exrust same thing or did I miss the rustez ??

[257 Shooter]

Wayne, he is just trying to help Kano. Rustez sounds a lot better than exrust. Kano should thank Shotman for the help.;):kidding:

[Wayne S]

257,
Thanks, and SHAME ON HIM,:roll:,

[high standard 40]

Rustez was the name used in the animated movie "Cars" for the sponsor for the red car. But it was spelled "Rust-Eze"

Google is a wonderful thing.:smile:

[shotman]

Sorry exrust is right but rustez sounds better. You will see a hax mat fee but that only applies to a 5 gal can. I think it would be a very good brass cleaner but I will not say till I do some more testing. If it works, its the fastest I have seen. had some old military brass and 5 seconds they looked like new. but I dont know what will happen in a few days.