PDA

View Full Version : fellow boolit casters, what have I ??


twotoescharlie
10-11-2009, 02:10 PM
friend gave this to me,
16 inches long, approximately 1/2 round
little over 2 inches wide on bottom
1 3/4 inches tall
weighs 16 pounds
is not thumbnail soft, rings slightly when dropped
bullet shaped casting with ITMC with a small o in the C in it every 6 inches on upper part. ain't got no camera!!

TTC
257 Shooter
10-11-2009, 03:24 PM
Sounds like a pig of Linotype. Does it have a oval opening on the top that a hook will go through?
HeavyMetal
10-11-2009, 03:57 PM
try googling the ITMC logo and see what you come up with.

Bear in mind that small o in the C might stand for Co.
madsenshooter
10-11-2009, 04:00 PM
International Type Metal
Shiloh
10-11-2009, 04:20 PM
Sounds like a pig of Linotype. Does it have a oval opening on the top that a hook will go through?

My thoughts as well.
twotoescharlie
10-11-2009, 05:31 PM
no oval opening, both ends have been removed

TTC