NOE 32/8mm 326407 185Gr.

[SwedeNelson]

Any interest in a 32/8mm 326407 185Gr.

http://castboolits.gunloads.com/picture.php?albumid=145&pictureid=1397

In response to feed back that we are getting
on our 32/8mm 326407 140Gr. group buy we are
offering this one for consideration. If this is to heavy
we could take a band or two off (about 10Gr. each)

Would be another good one for those M48 Mauser's
that are floating around out there too.

Swede Nelson

[dromia]

I'm in.

Hope the lighter one still happens as I have an application for that one too.

[Hardcast416taylor]

YES!!! I would definatley be interested in this 8mm mold seeing the light of day in the 185 gr. weight Loverin type design. I can see a 2 or maybe 3 cavity sitting on my bench. Of course handle type that fit and mold metal type construction are arguable later on, a top punch is a nice perk also.Robert

[chboats]

I would definitely be interested. I have a suggestion. Make the boolit more of a taper. Noise .313, first band .316, second band .319, third band .321, forth band .324 and the rest .326. I believe it would better fit the worn throat of many of the 8mm Mausers. Basicly an 8mm version of the Saeco 315

Carl

[LIMPINGJ]

I am in for something about factory standard weight for the 32-40. I think 185gr. would be about tops in weight for decent velocity in a 32-40.

[adkpete]

I would be in, I'm looking for something to shoot out of 2 94 winchesters. one in
32-40 and one in 32 special.

[DaveD]

I'm interested as well.

[largom]

I'm in as long as you leave it as is. Swede, if you keep this up I will definitely have to claim you on my income tax as a DEPENDANT!
Love my NOE molds.

Larry

[dominicfortune00]

Swede

I keep forgetting that you tempt me with things I want. :mrgreen:

I'll take a 4 cavity.

Payment sent in last week.

[Char-Gar]

I am in with it as is. Just tell me where to send the money. Don't jack with specs on the bands. Leave them as they are. You got it right the first time. Trust me on this one. Now you have a scaled up 311407 Mod. It will be a winner in the various 8mm rifles.

[bullshot]

I like this also. Any chance this could be had as a plain base? At any rate, I'm in.

[largom]

Hope this one does'nt die!

[mag44uk]

I think I could be in on this.
I have an 1893 Marlin in 32-40 and no mould yet!
Tony

[Ted]

I'm interested. I have several 8mm's (Yugo 24/47s) to feed.

Ted

[Char-Gar]

Well, I stuck a $100.00 bill away in an old Lyman (No.35) loading manual for one of these molds. I will hold off as long as I can, blowing it on something else, but I am weak! So, lets get this one cooking!

[Shepherd2]

I'm interested.

[largom]

Getting close to the required 15. I am sure there are a lot of Yugo's out there that would love this boolit.

Larry

[SwedeNelson]

OK lets get this one going

This is how N.O.E. is going to run our group buy.

You can ether PM or E-mail me at (pbsco1 @ qwestoffice.net) with
what you want. Will post a running list of user name and how many
cavities / options. When we get 15 on the list the order will go in for
the tooling. It takes two to three weeks for the tooling to get in.
We will keep the buy open until the tooling gets in.

At that time we will close the buy and ask you to send in your
payment.

It will take another three to four weeks to run the moulds.

Prices will be as follows:
Single cavity mould $68.00 Ea.
Double cavity mould $72.00 Ea.
Three cavity mould $79.00 Ea.
Four cavity mould $85.00 Ea.
Five cavity mould $92.00 Ea.
Plus Shipping/Handling.
Prices are subject to change at any time.

You can mix number of cavities in an order to make 15.
We will offer gas check only on this bullet.

Use LEE Commercial 6-Cavity handles (not included).
Lyman, RCBS type top punch furnished with each mould
as well as a sample of Bull Plate sprue plate lube.
Moulds are machined from 2024 Aluminum
Used for high strength structural and aircraft applications.
Tensile strength range 30,000 to 63,000 psi
Sprue plate (blued), alignment pins, and hardware will be
carbon steel.

Hollow pointing one cavity and furnishing a double
ended pin would be $35.00 Extra.

We will accept Checks, Money Orders and Pay-Pal
Pay-Pal requires a 3% sir-charge.

Our mailing address is:
Night Owl Enterprises
1645 W 150 N
Provo, Utah 84601
801 377-7289

Zip Code List:
63010
20111
78575
21120
12586
93433
06111
21787
43724
RG6 7LE
V0J 3A0
75440
96822
15401
12912




Thank you for your interest in this buy.
Swede Nelson

[SwedeNelson]

List of orders:
1 Dromia
*2 725 1 cavity
*3 Chboats2 cavity
*4 Limpingj 3 cavity w/HP
*5 Adkpete 3 cavity w/HP
*6 15Bobcat 2 cavity
*7 Largom 2 cavity
*8 dominicfortune00 4 cavity
*9 Bullshot 4 cavity
*10 Mag44UK 4 cavity
11 Ted 4 cavity
*12 Chargar 4 cavity
*13 Shepherd2 4 cavity
Please verify what you want (above)
*14 Techlava 5 cavity
15 Big Daddie 2 cavity
*16 Mohillbilly 5 cavity w/HP
*17 Nrut 4 cavity
18 dragonrider 3 cavity
*19 junkbug 4 cavity

Thanks
Swede Nelson

[Char-Gar]

PM sent for 4 holer.

[Ted]

4 Holer wanted here as well.

[techlava]

I am in for the 5

[bullshot]

I'll take a four cavity as well.

[Shepherd2]

Put me down for a 4 cavity.

[Mohillbilly]

If the money holds out I'd like my usual 5 cav. with a 1 Hp option

[BigDaddie]

PM sent for double Cavity

[SwedeNelson]

List of orders:
1 Dromia
*2 725 1 cavity
*3 Chboats2 cavity
4 Limpingj 3 cavity w/HP
5 Adkpete 3 cavity w/HP
*6 15Bobcat 2 cavity
*7 Largom 2 cavity
8 dominicfortune00
*9 Bullshot 4 cavity
*10 Mag44UK 4 cavity
11 Ted 4 cavity
*12 Chargar 4 cavity
*13 Shepherd2 4 cavity
Please verify what you want (above)
14 Techlava 5 cavity
15 Big Daddie 2 cavity
*16 Mohillbilly 5 cavity w/HP
*17 Nrut 4 cavity
18 dragonrider 3 cavity
*19 junkbug 4 cavity

Thanks
Swede Nelson

[DaveD]

My deal fell through for a mauser Al :(, I will have to let this one pass and save the funds for another NOE down the road. Sorry but thanks.

[15bobcat]

Al:
Received your confirmation PM for both orders on 10-26, but their not posted. 2 cavity each 326407 140Gr & 185Gr.

Thanks
Harold

[SwedeNelson]

Last Call!

Will close this buy Wednesday 11/4/09.
If you want to get in on this one now is the time.


Thanks
Swede Nelson

[Nrut]

I'll take a 4 cavity mold Swede...
:rolleyes:

[mag44uk]

4 cavity for me please to UK as usual!
Regards,
Tony

[adkpete]

3 cavity with one hp
Pete

[725]

Whew.... Saw this one at the last moment. I would like a single cavity unless there is a chance of having one with both a gas check and a plain base.

I see the price for a single but don't know the grand total with shipping, etc. Please advise and I'll get a USPS MO off. (Or whatever payment you prefer.)

[725]

For some reason my first posting didn't. Operator error, no doubt. So here it goes again. Don't want to create any confusion if it comes drifting out of the ether someday.

I want a single cavity mould. I would go for a two cavity, if one hole could be plain based, but that does not appear to be an option. In fact, if I could get a single plain base, I'd go for that, but am happy to order what you offer. I see the cost listed but not the shipping and handling fees. Please advise total cost and I'll get the funds on the way.

[chboats]

Swede Nelson

Confirm 2 cavity
paypal sent

[Hardcast416taylor]

I hate to do it, but I`ll have to pass on this mold buy due to medical expenses that were unforseen.Robert

[Char-Gar]

When do we send the money?

[dragonrider]

Alright, alright, I'm in for a 3 cavity.

[LIMPINGJ]

I finally decided on a 3 cavity with HP option.

[dromia]

When do we send the money?

Sent mine, Al changes the colour of our names on the master list at the begining of the thread when your dosh lands with him.

[junkbug]

I would like a four cavity, if there is time for me to get into this.


Sean

[725]

Swede,
Haven't got the shipping cost info, so I'm sending the $68 for the single and $10 shipping. That should cover it. If it doesn't, advise and I'll send the balance.
725
As they say, "Check's in the mail."

[Char-Gar]

Same here. I want a 4 hole, which is $85.00 and I don't see shipping cost listed, so I am sending an extra $10.00. If this isn't enough let me know.

[junkbug]

Just posted a personal check for $95.00; $85.00 for a four cavity, plus $10.00 estimated postage.

Hope its enough, let me know otherwise.

Sean

[725]

dromia, I just have to ask about "dosh". Is that a UK term for cash? Love the learn about new words.

[dromia]

"DOSH - "n British. Money. This is a working-class term from the early 1950s which was falling out of use in the 1960s, but which, like many similar words (bunce, loot, lolly, etc.) was revived in the money-conscious late 1980s. It is a favourite with alternative comedians and 'professional cockneys.' The original would seem logically to be the old African colonial term 'dash,' denoting a tip or bribe, but other authorities claim that it is influenced by 'doss,' in the sense of the price of a bed (for the night)." From "Dictionary of Contemporary Slang" by Tony Thorne (Pantheon Books, New York, 1990)."

It's been in current use as far as I can remember.

[BigDaddie]

Swede,

can u please advise shipping to Australia for a double cav mould? I will complete Paypal payment when I can get a total amount to send to you.

Cheers,

BD

[725]

dromia, Thank you , sir. Tickles me to learn this stuff.

[SwedeNelson]

This buy is closed.
Thanks all that ordered.
Sent PM's with cost to all.
Get your money in and we will start to
work it through the shop.

Thanks again for the orders.
Swede Nelson

[BigDaddie]

Payment sent via paypal.

Thanks for organising this for us all!!!

[dromia]

Oops!

Thought I'd payed for this but hadn't, rectified error now.

[semtav]

If anybody drops out, let me know. I'm looking at a 32-40.

[SwedeNelson]

Added zip code list on post #18

Swede Nelson

[chboats]

Swede
I guess I will ask the question. What is the status of this buy? According to the delivery schedule it has been "On the mill" for 2 weeks.
It does appear that production has slowed.

Carl

[SwedeNelson]

Carl

Tooling went bake to the tool grinder three times.
It doesn't take a lot to make problems with carbide.

Hope to have them next week.
Yes production has slowed.

Swede Nelson

[chboats]

Thanks for the update
Not a problem for me. better to have it done right than to have a bad job done quick

Carl

[GrizzLeeBear]

Swede, any progress on this one?

[SwedeNelson]

Cast with the first mould today.
Dimensions are good. Weight with my WW material 187.7
Gas check a snap fit.
http://i69.photobucket.com/albums/i80/swedenelson/326407185Gr.jpg

Will box them up and get them in the mail.

Swede Nelson

[SciFiJim]

If you don't already have gas checks for this mold yet, Blammer has 8mm gas checks available on the group buy page.


That's an impressive looking boolit!

[Char-Gar]

the look yummy!

[GrizzLeeBear]

Super! My 8mm and .32 special are drooling already!

[Nrut]

Super! My 8mm and .32 special are drooling already!
Same here...
Hope to get a spring bear :mrgreen: with mine if it'll feed in my Brno 8X57..
If not then it should be perfect in a .32 Special.......:Fire:

[chboats]

Just got it in the mail today. It is in the oven for the bake-in right now.

It looks GREAT as we have come to expect from NOE.

Thanks Swede

Carl

[SwedeNelson]

Got the M48BO Yugo to the range today.
http://i69.photobucket.com/albums/i80/swedenelson/326407185GR002.jpg

28Gr, -29Gr. 4198 50 yards.
First shot was low. Next four did OK.
http://i69.photobucket.com/albums/i80/swedenelson/326407185GR001.jpg

Withe a little playing it should work.

Swede Nelson

[DaveD]

Re-Run????