MikeSSS
10-06-2009, 08:37 PM
Put a scope on the 1967 made Winchester 94, 26" octagon, 30-30 and shot it today. Mount was a Weaver 3B and matching rings with a Weaver K 2.5 scope.
The Lee 309 120 R boolits were unsized, no gas check, L Alox, 5.5 gr 231, seated enough to not touch the rifling (pretty far in).
Accuracy at 100 yards just wasn't there, in the too much wind, too variable conditions we had today.
Don't know about leading but accuracy did deteriorate as the 26 rounds were fired. Tomorrow the gun gets cleaned and the report will be updated with the amount of leading. A couple days ago I shot maybe 40 rounds through it and there was just a mist of lead, it couldn't be felt on the Chore Boy brush.
The bench was concrete with a heavy front rest and good rear bag.
Next I'll try the same boolit and load but with gas checks and also Lee's 312 185 1R's with gas checks over a reasonable load of 2400.
The Lee 309 120 R boolits were unsized, no gas check, L Alox, 5.5 gr 231, seated enough to not touch the rifling (pretty far in).
Accuracy at 100 yards just wasn't there, in the too much wind, too variable conditions we had today.
Don't know about leading but accuracy did deteriorate as the 26 rounds were fired. Tomorrow the gun gets cleaned and the report will be updated with the amount of leading. A couple days ago I shot maybe 40 rounds through it and there was just a mist of lead, it couldn't be felt on the Chore Boy brush.
The bench was concrete with a heavy front rest and good rear bag.
Next I'll try the same boolit and load but with gas checks and also Lee's 312 185 1R's with gas checks over a reasonable load of 2400.