Looking for heavy (over 200 gr) cast 10mm boolits

[dogfood]

Ok, before everyone piles on because I should be casting these myself, I want to try them before I set myself up with a mold, sizer, etc.

I'm looking to buy 10mm cast bullets heavier than 200 grains. I know molds are made in the 210-230 grain range, but I haven't been able to locate boolits sold as such. Any help?

[Oh, and somebody is going to ask "Why?". And the answer (which I learned from my parents long ago) is "Because". Actually, I want to try them in my S&W 610 on bowling pins.]

Thanks,
dogfood

[O.S.O.K.]

http://www.doubletapammo.com/php/catalog/product_info.php?products_id=270&osCsid=6db88d67fc6416d049c719b696b3f29d

[dogfood]

Thanks for the Double Tap link ... but holy smokes, $22 per 100? I realize they're gas checked, which certainly drives up the price.

I was hoping for something a little less pricey. Plain base will work just fine.

dogfood

[KYCaster]

PM sent.

Jerry

[sleeper1428]

Should you want to consider casting some boolits yourself, NEI has one .401 mould that might meet your requirements. It's listed on the NEI site as .401-225 #201A and appears to be a TC BB design with one large lube groove. I've included a capture of the diagram of this boolit as shown on the NEI site.

sleeper1428

[Wayne Smith]

NEI will cut it bevel or flat base if you don't want the bevel.

[dogfood]

Thanks, folks. It looks like Jerry can set me up with some 220's to try.

And it was this NEI mold I was originally considering. So if all works out, that's the direction I'll go.

dogfood
:lovebooli