JesterGrin_1
09-10-2009, 03:53 PM
I have the 311284 mold of which will cast either a PB or GC. It is a two hole mold and one side was made into a PB. I have two powders to pick from for both of these designs of which are IMR-3031 and IMR-4350. This will go into a Rem 700 BDL in 30-06 and oldie lol. Made I would think in the Mid 70's.
It will be for Deer and Hog if they run past during Deer Season. The range is up to 200 yards.
So I would like to ask a good load for such a round and why you would choose which powder.
Thank You so much for any info I can get as I have never loaded a 30-06 before.
It will be for Deer and Hog if they run past during Deer Season. The range is up to 200 yards.
So I would like to ask a good load for such a round and why you would choose which powder.
Thank You so much for any info I can get as I have never loaded a 30-06 before.