Wayne Smith
09-07-2009, 11:58 AM
My Lyman Seat/Crimp die seats my cast Keith 32 boolit @ an OAL of 1.539" (that's at the top of the crimp groove) without the seating stem in place! This means I cannot seat it longer and still crimp. Yes, I have cleaned the die.
I got this die set mixed and used. It has an RCBS sizer/decapper, a Lee expander, and a Lyman seater. I have no idea what the DA stands for in the die number - that's what is on the die.
I have a lot more room in the cylinder of my Hand Ejector, First Change revolver.
It's not a problem in terms of using the die and shooting the gun, it's more accurate than my eyes allow at this point in my life. It just doesn't seem right.
Any comments?
I got this die set mixed and used. It has an RCBS sizer/decapper, a Lee expander, and a Lyman seater. I have no idea what the DA stands for in the die number - that's what is on the die.
I have a lot more room in the cylinder of my Hand Ejector, First Change revolver.
It's not a problem in terms of using the die and shooting the gun, it's more accurate than my eyes allow at this point in my life. It just doesn't seem right.
Any comments?