Lee W
09-06-2009, 06:34 PM
The bullet feeder gets caught once in a while and the transfer shuttle plate slips off the roll pin. It gums up the works pretty good.
There are no obstructions that I can find.
I am thinking I will need a tighter fitting drop tube and transfer bar. (Currently a .40 tube and bar with 9mm boolits.)
Any other thoughts?
Thanks.
There are no obstructions that I can find.
I am thinking I will need a tighter fitting drop tube and transfer bar. (Currently a .40 tube and bar with 9mm boolits.)
Any other thoughts?
Thanks.