Blacktail 8541
04-12-2006, 11:45 AM
Buckshot I just wanted to say thanks for the instructions that you have over on cast pics about how to hone out sizeing dies. It worked out perfectly. The instructions were very easy as was the job. I took a Saeco .409 die that sized to exactly .409 and opened it up to size at .41040 in a very short period of time. My first check on size was at what turned out to be .410 and it was not quite enough, those 1/10,000th come off very fast when polishing. I can see were it would be very easy to over do it and end up with a die that is to big, This did not happen in my case. Total time invloved was about 1 hr.
Thanks much, Jim:drinks:
Thanks much, Jim:drinks: