358009 NOE Group Buy

[SwedeNelson]

For information on this buy see “358009 Wonder what will happen”:
http://castboolits.gunloads.com/showthread.php?t=60618

Sorry posted the wrong drawing.
This is the right one.
http://castboolits.gunloads.com/picture.php?albumid=145&pictureid=1255
358009 R.N. G,C. 280Gr,

This is how N.O.E. is going to run our group buy.

You can ether PM or E-mail me at (pbsco1 @ qwestoffice.net) with
what you want. Will post a running list of user name and how many
cavities / options. When we get 15 on the list the order will go in for
the tooling. It takes two to three weeks for the tooling to get in.
We will keep the buy open until the tooling gets in.

At that time we will close the buy and ask you to send in your
payment.

It will take another three to four weeks to run the moulds.

Prices will be as follows:
Single cavity mould $68.00 Ea.
Double cavity mould $72.00 Ea.
Three cavity mould $79.00 Ea.
Four cavity mould $85.00 Ea.
Five cavity mould $92.00 Ea.
Plus Shipping/Handling.
Prices are subject to change at any time.

You can mix number of cavities in an order to make 15.
We will offer gas check only on this bullet.

Use LEE Commercial 6-Cavity handles (not included).
Lyman, RCBS type top punch furnished with each mould
as well as a sample of Bull Plate sprue plate lube.
Moulds are machined from 2024 Aluminum
Used for high strength structural and aircraft applications.
Tensile strength range 30,000 to 63,000 psi
Sprue plate (blued), alignment pins, and hardware will be
carbon steel.

Hollow pointing one cavity and furnishing a double
ended pin would be $35.00 Extra.

We will accept Checks, Money Orders and Pay-Pal
Pay-Pal requires a 3% sir-charge.

Our mailing address is:
Night Owl Enterprises
1645 W 150 N
Provo, Utah 84601
801 377-7289

Zip Code List
K4A 4A4
06111
9391
94521
34655
12586
59917
65059
91106
45327
16678
22192
46750
97113
85250
43445
18618
54235
41169
33634
28227
19135
99567
48415
87144




Thank you for your interest in this buy.
Swede Nelson

[SwedeNelson]

List of orders:
*1 GLL (2) 1 cavity
*2 358wcf 3 cavity w/HP
*3 Johnch 1 cavity w/HP
*4 Dutch4122 3 cavity w/HP
*5 BCall 2 cavity
*6 jimgun 5 cavity w/HP
*7 AnthonyB 3 cavity w/HP
*8 Gordon S. Dempsey 4 cavity
*9 jtaylor1960 1 cavity
*10 AndyP 4 cavity w/HP
*11 insanelupus 3 cavity w/HP, 2 cavity w/HP
*12 Euan 3 cavity w/HP
*13 MDF99 4 cavity
*14 Patsmarlins 1 cavity w/HP
*15 Bullshot 4 cavity
*16 bearcove 3 cavity
*17 sagamore-one 4 cavity
*18 Bear4570 3 cavity w/HP
*19 Artful 4 cavity
*20 15bobcat 1 cavity w/HP
*21 Brian 1 cavity w/HP
*22 arcticbreeze 2 cavity
*23 JDBrowning 2 cavity
*24 rbuck351 2 cavity
*25 Skeeterhawk 2 cavity
*26 Rico1950 3 cavity

Thanks
Swede Nelson

[GLL]

Swede:

I will take one single cavity mould !

PM to you !

Thank you for running this one ! :)

Jerry

[358wcf]

[smilie=1:I guess I should have seen this one coming-- since I had a hand in making it happen??
Put me down for one mold, 3 cavity, with one hollowpoint.
Love the quality, Swede, and thanks for doing this for the gang!

358wcf

[SwedeNelson]

GLL / 358wcf

Sent PM.
Posted wrong drawing.
Have right one shown now.
Sorry for any problems.

Swede Nelson

[Johnch]

I will take a single cavity
With it Hollow pointed

John

[GLL]

Swede:

PM to you about the drawing.

Jerry

[Dutch4122]

PM sent:D

3 cavity with one hollowpointed, please.

[BCall]

I'm in for a plain two cavity. Thanks, Billy

[jimgun]

count me in for a 5 cavity with one hp thanks jim

[44mag1]

What type of metal are these going to be made out of

[SwedeNelson]

44mag1

All our blocks are Aluminum.

Swede Nelson

[msp2640]

Very nice mould and thanks Swede for making it for us. I don't have a 35 cal rifle right now or I'd be all over this. I've done this before - buy a mould, then get a rifle/ pistol for it, dies, brass, etc - $50-75 mould winds up costing $1000. It is a sickness. I don't have a spare grand right now, but I'm still trying to convince myself to buy this mould "for later" when it won't be available. A free bump for now - see if I can come up with a spare $75 or so in the next week or so..........and then a new Win m70 Featherweight redone in 358 and a nice compact Leupold on top........in the end this going to cost way over a grand................Thanks - Bill L

[lurch]

Oh boy - trying to resist on this... I'm in the "don't have a .35-something but want one" boat myself. I "need" this like I need another - nevermind - but I sure think I want one... I'm with Bill - If I get an overactive itch in the next couple of weeks I'll jump, but for now I'm on the sidelines. Tempting...very tempting...

[PatMarlin]

On the double ended hollow point pin, what is the double end for?

[SwedeNelson]

PatMarlin

PM sent.
One end to make a hollow point and
the other to make a small flat point.

Swede Nelson

[insanelupus]

Swede,

I'm in for two.

#1. 3-cavity mould, with 1 of the 3 cavities hollow pointed please.

#2 2-cavity mould, with 1 of the 2 cavities hollow pointed please.


The number 2 mould will be a gift to a friend so both will be shipped to my address which I will provide with payment. Can you still include a top punch, Bull Plate lube, etc., with each mould please?

Also, do you have an estimate as to shipping and when would you like payment sent? Thank you.

[Euan]

Swede,
I can't fight the temptation any more. Put me do me down for a 3 cavity with one hollow point and double ended pin.
Cheers Euan.

[insanelupus]

Swede, how much is the shipping and handling going to be? Thanks.

[SwedeNelson]

insanelupus

S/H with Ins. is $10.00

Swede Nelson

[MDF99]

Please put me down for one 4-cavity 358009 mold. Thanks.

[insanelupus]

Okay Swede, thanks! I assume that is per mould (as opposed to per order). I'll try to get a check in the mail next week. Thanks!

[SwedeNelson]

insanelupus

Sorry.
We can get three moulds in a USPS box.
So S/H would be $10 per 3 moulds.

Swede Nelson

[insanelupus]

Ahh, got it! Thanks again.

[bullshot]

So here's number fifteen. I'll take a four cavity no options.

[SwedeNelson]

That makes 15.
Will order the tooling Monday.
And start to PM every one with a cost.
The tooling is running about 2 to 2 1/2 weeks.
So we will keep the buy open until we get
it in - for any that would still like to get in.

Thanks for the orders
We couldn't do it with out you.
Swede Nelson

[bearcove]

I'll take a 3 cavity. No HP.

[sagamore-one]

I'll take a 4 cavity... no options.

[GLL]

I will take one more single cavity !

Jerry

[Bear4570]

Geez you guys are killin me.. put me down for one 3 cavity with one cav hollow point.

[Artful]

I'd like a 4 cavity please

[brian]

Swede,
please sign me up for a single cavity HP. Let me know when/where to send the check. Looks like $68 + $35 + $10, correct?
thanks,
Brian

[arcticbreeze]

Alright, what the H3LL,

I'll take a 3 cavity. No HP

[rbuck351]

I would like a two cavity with no mods, sent pm thanks Buck

[arcticbreeze]

Alright, what the H3LL,

I'll take a 3 cavity. No HP

If you can, please change mine to a 2 cavity, No Hp. Don't worry about any difference.

Thanks
Marc

[Skeeterhawk]

Please put me down for a 2-Cav. (no HP).

Thx,
Skeeterhawk

[Rico1950]

I'm in for a 3 cavity.
Thanks,
Rico1950

[Rico1950]

Check for 3 cavity went out this morning.

[SwedeNelson]

Last call!Got the tooling in.

We will close this buy 10/23/09 -next Friday-.

Any that want to get in needs to do so,
and if you haven't got your money in you need to
do so soon.

Thanks for the orders.
Swede Nelson

[bearcove]

Check is in the caring hands of the post office.

[Artful]

Please confirm you got my payment

[SwedeNelson]

Artful

Check the Zip code list on post #1
We did get it OK.

Thanks for the order.
Swede Nelson

[SwedeNelson]

This buy is closed.
If you havent got you money in yet please do so now.
Thanks for the orders.

Swede Nelson

[Artful]

Any chance these will ship for Xmas ?

[GLL]

Any chance these will ship for Xmas ?

Swede's shipping schedule indicates the very end of the month, but they have had a few problems with another mould so there is a couple days lag time.

NOE is delivering at an amazingly rapid pace !

Jerry

[Artful]

Where do I find this shipping schedule that indicates the very end of the month?

[timbuck]

http://castboolits.gunloads.com/showthread.php?t=68694

In Vendor sponsors section.

[bearcove]

They will be about 11 months early for Christmas next year. And I thought my wife shopped early!

[Andy_P]

Anyone receive theirs yet?

[JesterGrin_1]

February
(31) K31 311-180Gr
(28) 358009 RN 280Gr.
(9) 45BD 210Gr.
(14) 314 SP 129Gr.



He does not give a date for each Mould but I am sure you will have it as soon as it is ready.

[GLL]

February will be a good month ! :)

358009 and 45BD ! Just like Christmas !

April will be even better ! :)

Jerry

[SwedeNelson]

Proofed the tooling for this one.
Should go to the mill in about 2 weeks.

Swede Nelson

[rbuck351]

Thanks for the update! YAHOOOOOO!!![smilie=w:

[Artful]

Should be this week !

[JesterGrin_1]

Should be,Could be,A for sure Maybe but not sure lol. But for myself that is okay as of right now I do not even have a thing to shoot the 358009 in but I will have a 35 Whelen when I get the barrel. :)

[SwedeNelson]

Picked up moulds this morning.
Cast with first one.
Dimensions good, nose .350 to .3504
body .3606 to .3612 Weight 287Gr.
http://i69.photobucket.com/albums/i80/swedenelson/358009RN280Gr002.jpg
Gas check a snug fit.

Will QC and box them up.
Start shipping Monday.

Swede Nelson

[Rico1950]

That's GREAT!!!! Can't Wait Al.
NICE WORK.

[bullshot]

Got my NOE #358009 today. Another work of art. Thanks Al.

[arcticbreeze]

I got mine today. It is beauuuuuuutiiiiiifuuuuul!!! The best thing about it is I forgot that I had ordered it so it was a great surprise.
:lovebooli

[Johnch]

Mine arived today

Again it looks perfict

Hope to have a day off soon to run a few

John

[Bear4570]

Got mine today, looks great, can't wait to get to casting this weekend. Gonna be great in my 35 Whelen.

Thanks for the great work on this buy.

[Rico1950]

I also received mine today, beautiful job Al.
After cleaning and breakin ran a few with my WW alloy to get some measurements.
As cast weight 285-286grs., diameter .3605-.361", shank diameter .3435-.344".
Boolits fell like rain right from the start.

[insanelupus]

Received both of mine today as well. My 3 cavity looked great. I'd ordered a 2 cavity for a cousin. On his the cavity that had been hollowpointed looked like it had been either lapped or it had some oil/grease in it that had been wiped out (but not all the way). The cavity did look different than any of mine or the other cavity in the block, but I didn't have time to really check it out carefully. I told him I'd send it to him and I'd let him clean out the caivty and cast with it and if it has a problem dimensionally I know Swede will stand behind it. I'm guessing it will clean up just fine. They look like really nice moulds and I'm excited to see how this thing casts after I get it broke in with the heating and cooling break in regimen.

Swede, any problem using a hot plate (with a chunk of steel on top of the burner to sit the mould on) to heat it up and cool it as long as you stay within the prescribed temperature rating?

[rbuck351]

Got mine today. Now I see what all thus fuss is about. These are top notch molds. Gonna go get it seasoned and pour a few. Thanks Buck

[GLL]

My pair of single cavity moulds arrived today .

VERY nice !

Now to start the "modifications" ! :) :)

Jerry

[kodiakshooter]

Mine was waiting for me when I just got back to town.
Real nice mold.
Can't wait to pour some and fire up the Whelen.

[rbuck351]

What can I say, this mold casts as nice as any of the 35 or 40 molds I have. The size is right where it's supposed to be. They weigh right at 289grs + or - less than 1gr. My 358NM should be very happy with a diet of these.

[Artful]

Excellent workmanship - Thank you

[Andy_P]

Beautiful workmanship. Can't say enough good things about NOE.

[WallyM3]

Looks like I missed this one. I don't suppose there's an unclaimed spare available?

[JesterGrin_1]

Go here but you need to hurry. http://castboolits.gunloads.com/showthread.php?t=80119

[WallyM3]

Thanks!

Got a PM sent.