Who Sells This Plastic Mold Box?

[John Boy]

It's a green hinged lid box with no vendor's logo on it.
Measurements:
9" wide
5" high
6" deep
UPC label says
0029294638080 and 003035845

Need a few for double cavity molds with long sprue plates ... Thanks

[kyle623]

green is generally rcbs

[jim4065]

I'd look around at the Midway site - they seem to have a good variety of plastic boxes.

How about this one? http://www.midwayusa.com/viewproduct/?productnumber=213048

Or look under "utility box" maybe.

[John Boy]

Thanks Jim. I did the search at Midway before the post and this box is too small:
# Dimensions: Height: 2"
# Length: 3-1/2"
# Width: 2-1/2"

Kyle - yep, agree about RCBS. They have their logo on the boxes and they are smaller. Have a few

[powderburnerr]

both dillon and frankfort sell plastic boxes.........Dean

[wiljen]

try here

http://gepir.gs1.org/V31/xx/

[John Boy]

Wiljen, thanks for the link. I was trying earlier today to find such a link without success. I keyed all the numbers in the 4 types of codes and appears the numbers on the box are not the correct number or the vendor is not a GS1 code member.

[Edubya]

What makes you think that it is, or was, made for ammo or associated with guns? It might be of some help if you posted a picture.
EW

[Guesser]

Craft stores carry a wide variety of plastic containers, some open and some compartmentalized. I've seen them wide and long and everywhere in between.

[John Boy]

Here's the box ...
http://i222.photobucket.com/albums/dd220/Meadowmucker/Bullets/IMGP0375.jpg
http://i222.photobucket.com/albums/dd220/Meadowmucker/Bullets/IMGP0376.jpg
Measurements:
9" wide
5" high
6" deep
Different UPC coding but same measurements

[Pepe Ray]

Wow!!!
Thats a BIG mold!!

Pepe Ray

[Edubya]

looked through several sites and still can't help with this specific box but came up with several sites that might give you an idea: http://www.business.com/directory/industrial_goods_and_services/packaging_and_containers/cartons_and_boxes/plastic_boxes/

http://www.pelican-case.com/?gclid=CNLM1orl4JwCFRqdnAod6hPHLA (I've had tremendous success with these, from lighters to gun cases).
Good luck in your endeavors. Let us know when you find IT.
EW

[John Boy]

Gents, I want to thank you all for your help to what I thought was going to be a quick answer. I've data mined all the posted references and even the bar code numbers ... NADA. So, I'd like to close this thread off and I'll start looking locally at the craft stores as Guesser suggested and calling possible mold vendors

Pepe, the mold is a 545gr (459 diameter) double cavity Gunn Modified nose pour mold made by Fred Leeth at Pioneer Products. I have several of his and there are no plastic boxes. The other double cavities are large too

[GP100man]

at wally world in campin