grip screws

[Big Dave]

Have a Llama 45ACP circa 1970 missing a grip screw. Since retiring I don't have access to a precision thread cutting lathe or I would make one. Anyone got thoughts on where to find one?


Thanks,
Dave:redneck:

[JIMinPHX]

Depending on which Llama you have, this might do it for you -
http://www.e-gunparts.com/product.asp?chrProductSKU=111790

Or this -
http://www.e-gunparts.com/product.asp?chrProductSKU=125710

Or this -
http://www.e-gunparts.com/product.asp?chrProductSKU=946430&MC=

Also, generally speaking, grip screws are not easy to make on a lathe. They often have odd pitches that most thread boxes don't cover & there's no room for an undercut at the end of the thread.

[azrednek]

I agree with Jim. Friend of mine recently located grip screws for his LLama 380 there.

[Big Dave]

Tried Numerich gun parts part numbers, all are currently out of stock. Just have to keep trying
thanks
Big Dave

[leftiye]

Can you determine the size/pitch etc. from the remaining screw(s)? Brownell's might carry that screw if you know what to ask for.