Star sizer spacing

[crabo]

I have two .460 boolits that I want to lube.

The first has a center band that is .100 wide and is .210 center to center on the lube grooves.

The fsecond has a center band that is .075 wide and is .130 center to center on the lube grooves.

Do you think if I have Lathesmith make a die with .160 spacing, it would fill both boolits lube groove? I would have him make the die with 5 holes in a row instead of the usual 3.

Thanks,

[runfiverun]

3 would be plenty you can block one set of holes with a driving band.
just remember how deep the rod is gonna push each boolit.
your spacing might work also but you might have to double pump on one boolit.