PDA

View Full Version : reloader 19



redneckdan
04-05-2006, 01:09 AM
anyone have data for 8x57 mauser using reloader 19? I did some horse trading at the range tonight and ended up with a pound of it. thanks.

BABore
04-05-2006, 12:47 PM
http://www.alliantpowder.com/reloaders/RecipeList.aspx?gauge=&gtypeid=2&title=Centerfire%20Load

redneckdan
04-05-2006, 03:58 PM
all they have mauser data for is reloader 15. thanks though.

bruce drake
04-05-2006, 06:57 PM
I bought a pound of Re19 a few months ago and I then found out that it is considered a "Magnum" Powder.

I couldn't find any loads for 8mm either.

I'm using a 7mm Mauser 160gr starting load of 44.5gr for my 8mm 180gr Jacketed loads. Speed is about 2300fps but I find a few grains in the barrel after every shot. Decent fireball at the end of my M48's barrel.

I hope this helps.

Bruce

Jeffreytooker
04-06-2006, 12:09 AM
all they have mauser data for is reloader 15. thanks though.

Dan:

What type of bullet, jacketed or cast, and what weight? Desired velocity and barrel length?

I will run a few on Quickload.

Jeffrey

Jeffreytooker
04-06-2006, 12:34 AM
I'm using a 7mm Mauser 160gr starting load of 44.5gr for my 8mm 180gr Jacketed loads.

Dan:

With 29" barrel, 175 gr Sierra bullet, 55.3 gr (100% fill) of RE-19 will give 2629 fps. Pmax 37212, 88.65% burn. That is as much as you can do with it. It is too slow. Can't get enough pressure to burn all of the powder.

It is a much better powder in 7X57 and other cases which have a smaller bore diameter in relation to their case volume.