View Full Version : 7.62 question
kyle623
08-12-2009, 10:01 AM
this is probably a stupid question but, what size gas checks do i nee for a 7.62 boolit? All i see are 30 cal gc's.
Dutch4122
08-12-2009, 10:06 AM
.30 caliber gas checks are correct for 7.62 caliber rifles. What specific caliber are you loading for?
Hardcast416taylor
08-12-2009, 10:14 AM
You answered your own question. The .30 cal. is 7.62 in metric language. For instance, the 7.62 NATO cartridge is our .308 Winchester. Sorry if this isn`t clear as mud, but is the best answer I could think of in a hurry.Robert
kyle623
08-12-2009, 11:19 AM
7.62x39 and 54r. just wasn't sure since there are so many different 30 cal's out there. thanks for the answers.
runfiverun
08-12-2009, 03:03 PM
the 30 cal's do for the 311's too.
Craig67
08-12-2009, 03:07 PM
I use the .30 cal checks on my X39 and X54r, they work fine.
gwilliams2
08-12-2009, 05:11 PM
Same here... 30 cal...
GuzziRider
08-12-2009, 11:20 PM
I use the .30 cal checks on my X39 and X54r, they work fine.
What mold are you using for the GC X54r and what rifle are you shooting them in? I am looking at starting to cast for one of my Nagants that has a very nice non-pitted bore.
Craig67
08-16-2009, 06:07 PM
I'm using the Lee C312-185-1R intended for the .303 Brit. and the C312-155-2R intended for the 7.62X39.
I'm shooting them in a Polish M44.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.