Blammer
08-05-2009, 11:05 PM
Ok I will get some samples sent to the first 3 people who shoot both
BOTH not one or the other but BOTH
348 and 416.
In the event noone shoots both, I'll then look for those who have one of them.
Post here, first three posting here I'll pm for their mailing address.
You must be willing to test these GC's within the week of recieving them and report back. Posting here for feed back is good enough or you can PM me.
you'll need to observe fit before sizing, fit after sizing and how they sized.
is the GC too tall, to short, whatever....
Please take a diameter measuerment of your GC shank for all boolits tried, the more different moulds per caliber the better.
Gator has reworked his dies for these calibers and wants to get a few of them tested.
BOTH not one or the other but BOTH
348 and 416.
In the event noone shoots both, I'll then look for those who have one of them.
Post here, first three posting here I'll pm for their mailing address.
You must be willing to test these GC's within the week of recieving them and report back. Posting here for feed back is good enough or you can PM me.
you'll need to observe fit before sizing, fit after sizing and how they sized.
is the GC too tall, to short, whatever....
Please take a diameter measuerment of your GC shank for all boolits tried, the more different moulds per caliber the better.
Gator has reworked his dies for these calibers and wants to get a few of them tested.