jimkim
08-03-2009, 08:20 PM
I recently received a couple of bullet moulds from a member on G&G. I took one down to my buddy Glenn's shop. It is a Lee single cavity 45 cal HP mould. The HP pin was ground off so it no longer casts HP bullets. I asked Glenn to help me find a pin for it. He sent an email to Lee. This is their exchange.
Mr. K*****
We quit making hollow point bullet molds at the beginning of '08. We
still have some of the core pins around as replacement parts. Please
forward your snail mail address and I will send you one.
At 07:40 AM 7/31/2009, you wrote:
> I have a 90489 45 ACP HP mold that needs a new hollow point
> attachment (the allen screw and the hollow point post that it
> screws into). Can you provide me with this item. The mold works
> perfectly, but the previous owner ground down the hollow point tip
> that the bullet forms around. Thanks for your help.
Mr. K*****
We quit making hollow point bullet molds at the beginning of '08. We
still have some of the core pins around as replacement parts. Please
forward your snail mail address and I will send you one.
At 07:40 AM 7/31/2009, you wrote:
> I have a 90489 45 ACP HP mold that needs a new hollow point
> attachment (the allen screw and the hollow point post that it
> screws into). Can you provide me with this item. The mold works
> perfectly, but the previous owner ground down the hollow point tip
> that the bullet forms around. Thanks for your help.