canuck4570
07-30-2009, 09:02 PM
well yes it is
A few weeks ago I asked it this was possible to take the pin of a lube seizer die and have it countersink so the shank of a gaz check bullet would fit in and while lubing would prevent the lube from lubing the portion of the gaz check bullet.
My son machined me such a pin a it works beautifully
lube some 150 bullet and no problem
a picture is worth a thousand wordshttp://i705.photobucket.com/albums/ww57/michelmongrain/IMG_0519.jpg
the wall of the pin are .010 thousand and surprisingly solid ( same as a gaz check itself even harder since the pin is steelhttp://i705.photobucket.com/albums/ww57/michelmongrain/IMG_0522.jpg
here is a picture of a bullet has it is seating on the pin before going in the seizer die
http://i705.photobucket.com/albums/ww57/michelmongrain/IMG_0523.jpg
here are some bullet has they come out of the seizer die et "voila" no lube on the skank
so now when I want gaz check bullet I use the solid pin and when I wish no gaz check and no lube I use the cutersink pin
My hope is that Buck shot would offer this service to you all casters I would be honered...
Canuck
A few weeks ago I asked it this was possible to take the pin of a lube seizer die and have it countersink so the shank of a gaz check bullet would fit in and while lubing would prevent the lube from lubing the portion of the gaz check bullet.
My son machined me such a pin a it works beautifully
lube some 150 bullet and no problem
a picture is worth a thousand wordshttp://i705.photobucket.com/albums/ww57/michelmongrain/IMG_0519.jpg
the wall of the pin are .010 thousand and surprisingly solid ( same as a gaz check itself even harder since the pin is steelhttp://i705.photobucket.com/albums/ww57/michelmongrain/IMG_0522.jpg
here is a picture of a bullet has it is seating on the pin before going in the seizer die
http://i705.photobucket.com/albums/ww57/michelmongrain/IMG_0523.jpg
here are some bullet has they come out of the seizer die et "voila" no lube on the skank
so now when I want gaz check bullet I use the solid pin and when I wish no gaz check and no lube I use the cutersink pin
My hope is that Buck shot would offer this service to you all casters I would be honered...
Canuck