View Full Version : Anyone make top punches?
captain-03
07-30-2009, 01:30 PM
Got a couple Lyman .225 moulds that need top punches - they have been discontinued by Lyman -- the moulds and top punches are #225450 (#450) and #225462 (#462)???????
Take a 1/4" bolt and drill a 7/32 hole in the exact center of the head then fill it with some of the two part epoxy putty and use a 225450 bullet with the nose lubed to make a pointed hole in the putty. Let it harden and it should work for you.
Marlinreloader
07-30-2009, 03:51 PM
Get a hold of Buckshot. He is a member here. He makes them or a kit for them.
Should be in castpics at bottom of the page
Marlinreloader
A big +1 for the kit from Buckshot. He does a fine job making up the "blank" top punches, so after you have customized it, it looks good and works great. Order a few extra of various sizes so you will always be able to make up a punch for any new moulds you acquire.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.