rbstern
03-23-2006, 02:48 AM
For those of you who have tried the new Lee Lever Primer/Safety Prime product:
One of the (minor) frustrations I have with the original Lee turret press priming setup is that after the priming downstroke, you have to manually finish indexing for the press because the priming arm keeps the ram from bottoming out. It's a minor annoyance from a "time and motion" standpoint.
It looks like, with the new lever prime system, the bottom of the stroke is always the same with the primer arm always in place, so that you don't have to finish indexing the priming stroke manually.
Am I correct?
One of the (minor) frustrations I have with the original Lee turret press priming setup is that after the priming downstroke, you have to manually finish indexing for the press because the priming arm keeps the ram from bottoming out. It's a minor annoyance from a "time and motion" standpoint.
It looks like, with the new lever prime system, the bottom of the stroke is always the same with the primer arm always in place, so that you don't have to finish indexing the priming stroke manually.
Am I correct?