.444 and Bullseye powder charge recommendations?

[the_ursus]

I need some info on loading my 250gr and 260gr SWC plinkers with Bullseye powder for my Marlin .444 since I have half a can to use up. I've been using Unique but I'd rather save it for my .44 revolver. Anyone know where I can find some reloading data for that powder? Thanks!

Luke

[Marlin Junky]

How fast do you want to go? According to QuickLoad, 15 grains of Bullseye will produce a muzzle velocity of 1611 fps with Lyman 429244 and 1668 fps with Lyman 429421 at 27.5K PSI and 28.4K PSI, respectively.

MJ

[the_ursus]

Thanks MJ, 1600fps is plenty. I've been using 15gr of Unique but since I'm unfamiliar with Bullseye and the .444 I thought I'd ask.

[Marlin Junky]

Back the Bullseye down a grain or two and you'll achieve about the same pressure. Since I don't know anything more than the weight of your bullets, I'd say go with 13 grains of Bullseye first.

MJ

[the_ursus]

Thanks again MJ, if I end up with a good load I'll post the results.