338 Federal Reamer . . . WHERE?

[TCLouis]

Has anyone stumbled across a site offering the reamer for rent yet?

Also wondering about the dies.

[Blacktail 8541]

Renting may be a bit diffacult, but the good news is that you do not need a dedicated 338 federal reamer. All you need is a standard 308 reamer with a 338 neck reamer. The dies will be available for it very soon if they are not already. This cartridge is nothing more tha the 338/308 wildcat with Federals name on it.

[swheeler]

TCL; try this number386-736-2936 G Canfield, haven't checked, but likely.
Scooter

[versifier]

Blacktail, by a "neck reamer" do you mean a throating reamer?

[TCLouis]

Stuck with the 338-08 or decided to get fancy and make it hard. I have wanted one a long time since I load my 338 Mag to those levels to use around here.
Seems like a cast shooter also.
The mag LUVS Lee 338 bullet, but will NOT shot the 200s I have tried so far!
I found a load so quickly for the Lee 220 grainer, I got discouraged quickly with the 200 and quit my search. Now I am out of both boolits.

[6pt-sika]

I think the 338 Federal would be sweet in the new Remington Model 7CDL [smilie=1:

[scrapcan]

4-D shows the 338 federal in their list of rifle reamers. I have done tool rental from them in the past and the tool was in excellent shape. All arrived on time and they were pleasant to deal with.

http://www.4-dproducts.com

[georgemu]

What's the difference between the 338-08 and the 338 Federal chambers?