PDA

View Full Version : Puma .44 Mag. OAL


c1a1
06-24-2009, 12:41 PM
I have been casting265gr. boolits(TLC-432-265}using WW's, for use in a Puma .44 Mag.Can't find any info as to the best seating depth for this boolit. Thanks in advance for any info.
Calamity Jake
06-24-2009, 02:31 PM
Setup 2 or 3 dummy rounds with your boolit steated to the crimp groove and test for function, if that works, fine, if not then adjust OAL
runfiverun
06-24-2009, 07:04 PM
check your oal on those loaded rounds.
my 44 will just barely run a 429421 through it and i gotta help[tap] the lever sometimes.
as this will be the final boolit of choice for this rifle i will do some remedy's like a bit o light filing on the carrier stop about .005 should do it.