mallardsx2
06-22-2009, 09:29 PM
Many of you have heard that I made a gas powered bb maker over the last couple of summers. I got it running and man does it put out the BB's. The ones in the first video are not the best BB's i've made but after I ran them through the screens it appears that I am dripping anywhere between 5 and 8 shot decently round. Oh and if you are curious the temp of the antifreeze is 135 Deg F and the lead is around 375 for good shot. It took alot of work and trial and error to get this thing right but I finally got it running good. I will post a picture of the Patterns Compared to a normal shell sometime next week.Its definetly a two man job because I can drip about 150 pounds in an hour with this puppy and it likes to eat the lead. I will post some pics and blueprints that I drew up. Some of the pics are old and I have changed the style of my pump and antifreeze holding device. And if you are wondering, YES, there is a funnel and a hole in the bottom of that ammo can for the BB's to run out of and into a different can.
http://i20.photobucket.com/albums/b220/Mallardsx2/planpics006.jpg
http://i20.photobucket.com/albums/b220/Mallardsx2/planpics008.jpg
http://www.youtube.com/watch?v=FYHlRvdUnuQ
http://www.youtube.com/watch?v=ulWbFidY108
Works For me!
http://i20.photobucket.com/albums/b220/Mallardsx2/planpics006.jpg
http://i20.photobucket.com/albums/b220/Mallardsx2/planpics008.jpg
http://www.youtube.com/watch?v=FYHlRvdUnuQ
http://www.youtube.com/watch?v=ulWbFidY108
Works For me!