jonk
06-16-2009, 11:04 AM
Now first off, I reload 'regularly' for my 71/84 no problem. 370 gr .448" bullet. However, just because I can try it...
I'm thinking of taking the primed cases to the range and a can of FFG with a powder measure. Fill them right on the spot, just about full. Then drop an ox-yoke patch or lubricated wad on top and finger seat a .451 lead round ball. Carefully chamber so it doesn't dump out.
Option 2: same principle but with a light load of smokeless and the balls rolled in LLA. Mabye 3-4 gr of bullseye. The .451 ball should provide just enough neck tension in the .446 sized neck.
What do you think?
I'm thinking of taking the primed cases to the range and a can of FFG with a powder measure. Fill them right on the spot, just about full. Then drop an ox-yoke patch or lubricated wad on top and finger seat a .451 lead round ball. Carefully chamber so it doesn't dump out.
Option 2: same principle but with a light load of smokeless and the balls rolled in LLA. Mabye 3-4 gr of bullseye. The .451 ball should provide just enough neck tension in the .446 sized neck.
What do you think?