Need load for 7.62x54r

[amb1935]

160 gr cast lead, no gc
using h4i4 and red dot
would like both subsonic and supersonic loads. Thanks!

[NuJudge]

With powders slower than 4064 or so, one is well advised not to go below minimum loads because of Secondary Explosion Effect (SEE). H414 is a rather slow burning powder, and you will need to push a 160 gr bullet a lot faster than a plain base bullet will accurately go in order to reach minimum loads.

Red Dot should do nicely for both subsonic and super sonic. This is nothing I've discovered. Read here:
http://www.castbulletassoc.org/forum/view_topic.php?id=1387&forum_id=22