Saeco #443

[GLL]

Does anyone have an old SAECO catolog that lists the #443 mould ?

If you do, could you provide a description and possibly an image ?

Regards,

Jerry

[JP Jones]

email me with your address and I will take a picture of one of my old Saeco catalogs for you.

I have a supply of the original catalogs being retired from Saeco and also have flyers on most all of their products, 1970 patent Lead hardness tester, powder measures, lubesizers, lube die sizes, lube top punch designs, bullet designs and have email pictures of their products too.

JP

[GLL]

Thanks JP. eMail is on the way ! :)

Jerry

[lovedogs]

Or you can just e-mail techline@redding-reloading.com Good luck!

[Tom Myers]

Jerry,

I have a Saeco 4 Cavity mould numbered 433 F6E.
These are computer generated image and dimension drawings of the measurements I made of the castings from the mould.

Hope this helps.

Tom Myers
Precision Ballistics and Records (http://www.tmtpages.com/)

http://breeze.linksky48.com/~tommyers/web_images/thumbnails/Saeco%20Mold%20433%20Sae%20%20300_gr.jpg

http://breeze.linksky48.com/~tommyers/web_images/images/Saeco%20Mold%20433%20Sae%20%20300_gr.jpg

[GLL]

Tom:

BEAUTIFUL ! :)

I really appreciate all of the effort. Everything I needed (and more) is on your drawing.

I just went to your website for the first time. Great stuff !

Thank you very much !

Best Regards,

Jerry

[Old Footman]

I was casting today with 725 on an older SAECO mold # 290443. This .44 boolit cast out at 217 grains and I cannot find anything online about this mold. I am just wondering if this is the same mold you posted about. I see on this link that the mold handles were given the product number of 29000, which I think the first three number "290" was for a mold that came with handles. If anyone can advise, I would appreciate it.

https://www.buffaloarms.com/saeco-bullet-mold-chart/

Thank you - "Old Footman"