where to buy seaco top punch?

[BOOM BOOM]

HI,
Where can I buy a seaco top punch for their 180gr. 357 CB #354.
Top punch # is 46518 to work in Lyman lube sizer?
My normal sources Midway, Midsouth, Cabellas. Grafs, donT carry it.
Tried Redding/Seaco site but saw no way to place an order.
Is there another top punch that would work W/out deforming to bullet in my Lyman lube sizer?

[leftiye]

Saeco top punches don't work in Lyman sizers IIRC. You want the Lyman top punch that approximates the Saeco number. If that is the 46518 then see if it seems to fit well, and go from there. Saeco makes top punches for lyman designs too. If all else fails, call me.

[old goat]

HI,
Where can I buy a seaco top punch for their 180gr. 357 CB #354.
Top punch # is 46518 to work in Lyman lube sizer?
My normal sources Midway, Midsouth, Cabellas. Grafs, donT carry it.
Tried Redding/Seaco site but saw no way to place an order.
Is there another top punch that would work W/out deforming to bullet in my Lyman lube sizer?

...http://www.lockstock.com/prodinfo.asp?number=SAE46518

...old goat

[Calamity Jake]

Saeco also makes TPs for some of(NOT ALL) there boolits that fit the Lyman/RCBS lubesizer.

Any of the Lyman/RCBS TPs made for flat point that are large enough will work if used in Lyman/RCBS lubesizer they will not work in a Saeco sizer.

[MT Gianni]

Buckshot makes a hollowed out punch that you can fill with epoxy to fit your bullet nose.

[BOOM BOOM]

Hi,
thanks old goat, bought it.