Top punch for Lee mold and new project

[tommyn]

I have a set of 30 reece dies and 100 new headstamped bass and have a barrel on order from MGM for a contender 30 reece project. Its a 357 mag case necked to 30 cal. I'm only going to shoot cast from this barrel and looking at the Lee C309-150 mold. Its a 150 gr flat nose GS mold and was wondering which lyman top punch would work and also has anyone had any experience with this small case and cast boolits. Any help would be appreciated. Link to small amount of loading data. http://www.handloads.org/loaddata/default.asp?Caliber=30%20REECE&Weight=All&type=Handgun&Order=Powder&Source=

[Buckshot]

...............I have no load data on the cartridge. You can PM me about a custom NP or you can buy a Lyman or an RCBS 30 cal NP for one of their more pointed designs. Then using 5 minute epoxy or hot glue (or similar agents) create your own NP for the desired design.

...............Buckshot

[azjohn]

Try this link.http://www.castpics.net/ then click on the top punch reference.