Need help with rifle stock

[44wcf]

I have a Pidersoli Rolling Block in 45-70. I am getting older and am having trouble with the recoil. I am shooting a hot black load and don't want to reduce it.
Who can I get to install a mercury recoil reducer?
The stock does not have a stock bolt hole. The stock is held on with 2 tang screws. It will require a hole being drilled for the reducer.
Thanks for any help
44-40wcf

[Nobade]

If you're near Albuquerque, NM I can take care of it.
www.scorehi.com

[725]

Good choice to mitigate the effects of recoil. Adds weight to the gun, but it's worth it. Make sure your installer inserts the tube (ie, drills the hole) at an upward angle. To be most effective, the mercury must pool at the end of the tube closest to your shoulder prior to letting the shot off. At recoil, the fluid must "sit there" and then slam into the gun as it begins it's reward movement (recoil). That's what eats the recoil and gives your shoulder a break. Works amazingly well. Good luck.