View Full Version : G-Rx Push Thru Base Sizing Die
arcticbreeze
05-02-2009, 09:33 PM
Has anyone tried one of these? It is only available in 40 S&W right now but if it works I would think it would pay for itself.
http://www.redding-reloading.com/pages/grxpushthru.html
HeavyMetal
05-02-2009, 09:51 PM
Saw a video a few weeks ago on this very site showing a guy, don't remember his screen name, shoving 40 S&W through a Lee carbide factory crimp die!
Having a bunch of 40 case's on hand I gave it a try and it works great! Good idea by Redding sadly they haven't figured out all the auto pistol dies are already available from Lee at about a THIRD LESS.
I do like the optional bottle attachment might check the Lee die and see if the theads will match up.
For a Pusher device I used my "plunger" from a 310 Lee push throuh lube sizer, worked great as well.
Heavy lead
05-02-2009, 10:13 PM
Why couldn't you just use a standard Lee (or whatever brand) carbide sizer die with the top cut off. You could use a push through Lee bullet collector for the bottle.
Good idea though.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.