G-Rx Push Thru Base Sizing Die

[arcticbreeze]

Has anyone tried one of these? It is only available in 40 S&W right now but if it works I would think it would pay for itself.

http://www.redding-reloading.com/pages/grxpushthru.html

[HeavyMetal]

Saw a video a few weeks ago on this very site showing a guy, don't remember his screen name, shoving 40 S&W through a Lee carbide factory crimp die!

Having a bunch of 40 case's on hand I gave it a try and it works great! Good idea by Redding sadly they haven't figured out all the auto pistol dies are already available from Lee at about a THIRD LESS.

I do like the optional bottle attachment might check the Lee die and see if the theads will match up.

For a Pusher device I used my "plunger" from a 310 Lee push throuh lube sizer, worked great as well.

[Heavy lead]

Why couldn't you just use a standard Lee (or whatever brand) carbide sizer die with the top cut off. You could use a push through Lee bullet collector for the bottle.
Good idea though.