NEI #25 mould ?

[6.5 mike]

Do any of you have any experance with this mould? Its the .264-130-g/c version.
Been thinking it would be a good choice for my 6.5s & maybe the 260. I know it cant be pushed fast , Im more looking for accurate load. Mainly be in the sweedes.
The main one will be a m/38 husky. It has a .266 bore. NEI website says they run .002/.003 over list size. That would work for me. Thanks.

[primersp]

yes they casted 002 more large than mould size ,i have a 460 bullets drop at 462 with scrape lead .

[C A Plater]

Don't have that mould but Lead Head (https://secure25.securewebsession.com/proshootpro.com/order.htm) sells them if you want to give the bullet a try. I've loaded them in 6.5TCU to around 1500 and in an old Swede to about 2000 fps. I did get the #24 mould for the TCU and it casts at around .267-8" depending on alloy.

[6.5 mike]

Thank`s for the info to all who repleied.