mongo-az
04-23-2009, 12:29 PM
Well, after my first pan-lube attempt, I decided cutting the boolits from the lube rather than pushing was the way to go - casting .452 255FP, so - here's what I whipped up:
1-.45-70 catridge case, expanded in the .45/70 die
1 screw bolt /w screw head
1 fender washer
1 compress. spring
I drilled out the primer pocket, stuck the fender washer and spring on the screw bolt, inserted it into the primer hole, and screw in the head screw inside the catridge case - voila, one spring-loaded pusher/cutter?
http://c.longfellow.home.mchsi.com/cutter.JPG
What do y'all think?
1-.45-70 catridge case, expanded in the .45/70 die
1 screw bolt /w screw head
1 fender washer
1 compress. spring
I drilled out the primer pocket, stuck the fender washer and spring on the screw bolt, inserted it into the primer hole, and screw in the head screw inside the catridge case - voila, one spring-loaded pusher/cutter?
http://c.longfellow.home.mchsi.com/cutter.JPG
What do y'all think?