d_striker
04-13-2009, 10:31 PM
Once I am able to find some handles for my Lee six cavity mold (TL-356-124-2R) I'll officially be making boolits!
I've been reading everything I could find on this site about Rooster Jacket Lube. They recommend it for loads under 1000 fps. I was planning on loading my boolits over approx. 3.5-3.9 grains of Bullseye. Another person told me his load of 3.5 grains Bullseye w/ same boolits were running on average around 1024 fps.
Does anyone have any experience pushing boolits around 1000 fps using the Rooster tumble lube? I want to reduce smoke and avoid LLA lube if possible but not if I get substantial leading.
I've been reading everything I could find on this site about Rooster Jacket Lube. They recommend it for loads under 1000 fps. I was planning on loading my boolits over approx. 3.5-3.9 grains of Bullseye. Another person told me his load of 3.5 grains Bullseye w/ same boolits were running on average around 1024 fps.
Does anyone have any experience pushing boolits around 1000 fps using the Rooster tumble lube? I want to reduce smoke and avoid LLA lube if possible but not if I get substantial leading.