Bump die for K31s

[smokemjoe]

I have a price on a carb. reamer to make a bump die for the lyman 450 sizer, you will have to size and lub. the bullet with your normal die. This will bump down the bore ride to . 299-.300. and the bands at .310, .This can be opened up more later, This will make the longer bullet fit the K31s or other 30 cal. that push the bullets back into the case or cant get the bolt handles to close, I can make the die, a kicker pin and a flat nose pusher I hope for about $30.00 plus shipping. Would there be any interested for these dies, Thanks for reading. Joe, You can also email me at wiest4@juno.com

[SwedeNelson]

Joe

When you get going I'll take one.
Will keep a eye on your thread.

Swede Nelson

[madsenshooter]

Joe made me one of these dies, I can say that they work well. Ive used it with a few different boolits and generally can get about 1/8" further out into the throat. Depends on the design of the boolit of course.

[jh45gun]

Do you have some pictures to post of the die and the bullets before and after? That would help?

[madsenshooter]

I posted some pics of various boolits I've used the die on here: http://castboolits.gunloads.com/showthread.php?t=43159 Scroll down, you'll find them. In most cases, it allowed me to seat the bullet out longer for better throat contact.

[jh45gun]

Thanks