Star Die Extractor Dimensions

[deltaenterprizes]

I bought a Star lube/sizer and the die removal tool was not included. I have one but am unable to locate it and want to make another one.
I have made the part thar screws into the press where the punch goes I want to know the dimensions of the part that pulls the die out.

[anachronism]

.623 diameter, 1.125 long, & the threaded shank is 1.925 long. It's knurled on the bottom, & I highly recommend the knurling.

[deltaenterprizes]

Thanks!

[dragonrider]

I made this one. might give you an idea. two piece. 1/2-27 thread for the small piece to thread into the machine and 1/4-20 for the extractor.
http://smg.photobucket.com/albums/0603/PaulGauthier/Star%20die%20extractor/