View Full Version : IMR 4064 with a #311041 cast bullet?
qajaq59
03-25-2009, 01:17 PM
Does anyone have a starter load for using IMR 4064 with a gas checked bullet? I wanted IMR 3031 but couldn't get it. I don't have that powder in my Lyman Cast Manual.
Any help is appreciated. Qajaq59
Jeffery8mm
03-25-2009, 02:50 PM
The 4064 will work great with that boolit. I dont remember my charges, but I do remember I used STARTING j word data and reduced it by 10%, worked up from there till accuracy was what I wanted. The FPS was in the 1650ish range I believe.
Jeff
GrizzLeeBear
03-25-2009, 04:25 PM
Uhh, what caliber?
Jeffery8mm
03-25-2009, 05:00 PM
30-30 was what I was working with. I guess I just assumed he was using a 30-30 also with that particular boolit. I should have asked also.
Jeff
qajaq59
03-25-2009, 06:13 PM
Does anyone have a starter load for using IMR 4064 with a gas checked bullet? I wanted IMR 3031 but couldn't get it. I don't have that powder in my Lyman Cast Manual.
Any help is appreciated. Qajaq59
Sorry about that. It's for a .308
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.