View Full Version : 45/70 + win748 loads?
troy_mclure
03-22-2009, 06:09 AM
ive found 1 load for this combo, in a speer manual, its a level 2 marlin load. a 400gr bullet, and 58gr-62gr powder.
anybody use win 748 with their 45/70 loads?
Slow Elk 45/70
03-22-2009, 07:00 AM
Hullo Troy, No. You might want to look at IMR-3031 , IMR 4198 and RL-7, these are used a lot in the 45/70 and the load manuals are full of these loads.
If you go to the threads and read through them you will find a lot of useful information on
the 45/70.
w30wcf
03-22-2009, 12:36 PM
Troy,
Yes, I have. 58 grs. - 400 gr. cast gas checked bullet. Worked well.
w30wcf
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.