View Full Version : 357 mag/ 357max
RICKGO1
03-20-2009, 01:53 AM
I am looking at a 357 mag contender barrel, can it be bored out to 357 max. What do you think it would cost ? Who could do it?
BABore
03-20-2009, 08:27 AM
Here you go.
http://www.bellmtcs.com/store/
One of the best. Call him up, he may even have one in stock. He cuts a good chamber and proper throat instead of the 0.400" long one T/C puts in.
Ron B.
03-20-2009, 09:44 AM
Hey, you can purchase an 357 MAXIMUM Encore barrel (I know, it's not a Contender) direct from FoxRidge. Or, at least I did about five years ago. Mine is heavy bull; and accurate.
GRB
cbrick
03-20-2009, 11:52 AM
I'll second BABore's recommendation, call or email Mike Belm.
Here's an eye opening article on chamber casts of T/C's written by Mike B.
T/C chamber casts (http://www.lasc.us/BellmChamberCasts.htm)
Rick
RICKGO1
03-20-2009, 05:49 PM
thanks for all the input. It gives me more than one choice.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.