Hope this is the right place, load data

[gcollins]

I came a crossed a lb of Scot 453, and from what I can find out, it is close to 700X, does anyone have any load data for this powder, I am wanting to use it in my wifes 380 auto with a 100gr jacketed bullet. I have been loading using Accurate #2, and I realy like how clean it burns! In my experence the ball powders all seem to burn cleaner, I also have 6lbs of other Obsolete Winchester ball powder, that I would like to use up, without looking, I am thinking 540, 768 ?, anyway, does anyone have any old hand load data for the old ball powders?
I would be very great full, for any and all help!
Thanks
Greg

[C1PNR]

Not much help here. About all I've ever used in the .380 is Unique and Red Dot.

The 700X I use is in my .45 ACP 25-2, but it's one of my most dependable loads for accuracy there.

Good luck on your quest.:-D

[gcollins]

Thanks for trying, I feel that away about Ac#2, when we bought that Keltec 380 for the wife we went out to the range and she shot 5" group, I loaded and shot a 12" group, this was with some super cheap ammo, I had bought some new brass and some serria bullets and loaded 3.4gr of #2, went to the range and shot 2 and 3" groups! I have also shot a lot of 700x and 800x. Maybe I can find some data, would like to use that pound up, as high as powder is.
Thanks Greg

[lv2tinker]

Here is a link that might help you with Scot 453.

http://shootersforum.com/showthread.htm?t=28779

Also just Google your other powders and you'll find a "lot" of info....

Cheers

[gcollins]

Lv2tinker, Thank you! That did help, big time!! I had calulated a load of 2.9grs with a 100gr bullet and the camber pressures will be okay!
Thanks greg

[swheeler]

The Win 540 is same powder as hodgdon HS6, and Win 571 is HS7 samo=samo