Anyone have data for .410 slugs and RB's?

[mikenbarb]

Im looking for some data for loading slugs and .375 RB's? in AA hulls. If anyone has any advice or suggestions I would appreciate it. I cant find any load data for this and driving me nuts trying to find some. Thanks, Mike

[longbow]

Take a look at the loading data here:

http://www.buckandslug.co.uk/

Might help.

There might be some here too:

http://www.4-10.co.uk/

I'll take a look in my Reloading for Shotgunners manual as I seem to recall some .410 slug data. If I find any I'll post it.

Longbow

[JASONBURNSDUNDEE]

http://i30.photobucket.com/albums/c335/jasonburnsdundee/001.jpg

This is what I came up with 3 lee 38 caliber balls and 5 grains of clays. No gunutz injured during my experiments. You are right I could not find much in the way of load

[mikenbarb]

Thanks much Longbow. Jason, Im looking for approved data with AA hulls because my kids are gonna be shooting them and done want to chance it. Nice groups though. Never heard of .303 brass in a .410 bore???

[longbow]

mikenbarb:

I only find 2 loads in the BPI slug manual:

hull = Winchester 3"
primer = Win 209
powder = 2400
charge = 18.2 gr.
filler = 1 x .410 nitro card wad .100" thick
slug = DGS.410wad & 92 gr. slug
press = 12,300
vel = 1300

hull = Winchester 3"
primer = Win 209
powder = IMR 4227
charge = 19.4 gr.
filler = 1 x .410 nitro card wad .100" thick
slug = DGS.410wad & 92 gr. slug
press = 11,100
vel = 1350

Not much but I hope it helps.

Longbow

[shotman]

be carefull with the balls .375 will work in a full choke if you use a card an filler wad NO shotcup. I use a shot cup with the petles cut off. and stack 4 balls in a 3in. Cut the crimp off and drop 6 or8 drops of bee wax on topball. I use H110 dont have load in front of me but same as for 3/4 oz shot load